OpenShift Plugin Reference 22.2.x

The XL Deploy OpenShift plugin enables XL Deploy to work with Red Hat OpenShift v3, v4 cloud PaaS. The plugin uses the kubernetes and openshift API libraries to communicate with OpenShift. For information about the plugin features, refer to Introduction to the XL OpenShift plugin.

Requirements

XL Deploy 7.5.0 or later
A valid OpenShift account and a user with admin rights associated to it
xld-kubernetes-plugin 8.5.0
OC v3.7.0 or later

Important: To use the XL Deploy OpenShift plugin with XL Deploy 7.1.0 or earlier, you must download the Jython jar file and replace jython-standalone-2.7.0.XXX.jar under the lib directory of the XL Deploy installation with it. This is not required for XL Deploy 7.2.0 or later.

Important: The XL Deploy OpenShift plugin 7.2.0 no longer supports individual YAML CIs for Pod, Development, Image Stream, and so on. Instead, there is single CI for YAML configurations, which supports all types of OpenShift configurations. This is a breaking change; you must delete and recreate packages when upgrading from 7.1.0 to 7.2.0

Important: To use OpenShift v4, you must specify the apiVersion:template.openshift.io/v1 for openshift.TemplateResourcesFile task.

Deployable vs. containers table

openshift.ProjectSpec	openshift.Server	openshift.Project
openshift.ResourcesFile openshift.TemplateResourcesFile openshift.RouteSpec openshift.ImageStreamSpec openshift.DeploymentConfigSpec	openshift.Project	openshift.Resources openshift.TemplateResources openshift.Route openshift.ImageStream openshift.DeploymentConfig
openshift.DeploymentStrategySpec openshift.RollingDeploymentStrategyParamsSpec openshift.DeploymentTriggerPolicySpec openshift.CustomDeploymentStrategyParamsSpec openshift.RecreateDeploymentStrategyParamsSpec	openshift.DeploymentConfig	openshift.DeploymentStrategy openshift.RollingDeploymentStrategyParams openshift.DeploymentTriggerPolicy openshift.CustomDeploymentStrategyParams openshift.RecreateDeploymentStrategyParams

Release notes

XL Deploy OpenShift plugin 9.8.0

Improvements

[ENG-844] - Support for OpenShift v4
[ENG-787] - Improve performance

Bug Fixes

[ENG-2202] - Stitch preview changes
[ENG-1705] - Fixed plugin to generate steps for each resource while deploying openshift.TemplateResourceFile

XL Deploy OpenShift plugin 9.7.0

Bug Fixes

[XLINT-1476] - Describing service failed. Load Balancer not ready!
[ENG-731] - 9.7.0 Openshift plugin can't deploy openshift.TemplateResourcesFile

XL Deploy OpenShift plugin 9.6.0

Bug Fixes

[XLINT-1373] - Fix parallel deployments to openshift containers fail with random 401 error

XL Deploy OpenShift plugin 9.5.2

Bug Fixes

[XLINT-512] - Update Kubernetes Plugin to Support Latest Version
[XLINT-1199] - Update/remove annotations from an Openshift/k8s resource
[XLINT-1226] - Using a Valid Template in Openshift Fails When Deployed via XLD

XL Deploy OpenShift plugin 9.5.1

Bug Fixes

[XLINT-1007] - Make OpenShift types order configurable

XL Deploy OpenShift plugin 9.5.0

Bug Fixes

[XLINT-885] - Fix wait scripts for the changes in kubernetes plugin
[LOVE-1186] - Add support to yaml List kind
[LOVE-1286] - Add patch dictionary support in kubernetes plugin

XL Deploy OpenShift plugin 9.0.5

Bug Fixes

[XLINT-860] - Use patch_type and propagation_policy on openshift
[XLINT-871] - Add option for user to select the desired update method

XL Deploy OpenShift plugin 9.0.2

Bug Fixes

[XLINT-864] - YAML format does not support List

XL Deploy OpenShift plugin 9.0.0

Improvements

[XLINT-508] - Add OpenShift proxy server configuration

Bug Fixes

[XLINT-536] - Validate deployment of deploymentconfigspec

XL Deploy OpenShift plugin 8.6.0

Improvements

[XLINT-535] - ServiceType should be optional when defining CIs that contain PodSpec

Bug Fixes

[XLINT-474] - Modifying k8s.ContainerPortSpec host port or container port not seen as modification requiring redeploy
[XLINT-531] - Fixed errors when deploying k8s manifests with UTF-8 encoding

XL Deploy OpenShift plugin 8.5.1

Bug Fixes

[XLINT-390] -Connections are not closed post XLD tasks

XL Deploy OpenShift plugin 8.5.0

New features

[DEPL-13716] - Add support for all resource types in k8s.resourceFile dynamic
[DEPL-13608] - Add support for deploying templates to OpenShift
[DEPL 13718] - Add DeploymentConfig property-based-CI in OpenShift plugin

Improvements

[DEPL-13991] - Automatically expose container ports as service
[DEPL-12695] - ProjectSpec is a DeployableContainer

XL Deploy OpenShift plugin 8.0.1

Bug Fixes

[DEPL-13315] - Check connection fix for windows

Improvements

[DEPL-13276] - Supporting version of API as preferred by Openshift Cluster.

XL Deploy OpenShift plugin 8.0.0

New features

[DEPL-12947] - Add support to create/destroy Cron Jobs
[DEPL-12946] - Add support to create/destroy Stateful Sets
[DEPL-12945] - Add support to create/destroy Storage Class
[DEPL-13036] - Support for multi-document Yamls

Improvements

[DEPL-12968] - Multiple api version support for YAML based deployables. Latest api versions will be used for property based deployables.
[DEPL-13053] - Update wait logic to use the count of unavailable pods while updating the deployment
[DEPL-12764] - Restart Pod/Deployment when an associated Config Map is modified
[DEPL-12766] - Improve error logging

Bug fixes

[DEPL-13099] - Remove redundant deployment orders fields in k8s.ResourcesFile Artifacts

XL Deploy OpenShift plugin 7.5.0

New features

Supports various Kubernetes objects like Pod, Service etc via property-based-deployables
[DEPL-12201] - Deploy/Undeploy an image stream to OpenShift cluster using property-based-deployables
[DEPL-12401] - Client certificate authentication support added
[DEPL-12199] - Deploy/Undeploy a route to OpenShift Server via property-based-deployables

XL Deploy OpenShift plugin 7.2.0

New features

[DEPL-12119] - Deploy/Undeploy k8s Pod using CI
[DEPL-12128] - Deploy/Undeploy k8s Deployment Config using CI
[DEPL-12198] - Single CI for YAML-based configurations

XL Deploy OpenShift plugin 7.1.0

New features

Deploy/Undeploy Build Config
Deploy/Undeploy Deployment Config
Deploy/Undeploy Image Stream
Deploy/Undeploy Pod
Deploy/Undeploy Route
Deploy/Undeploy Service
Deploy/Undeploy List of items

CI Reference

Configuration Item Overview

Deployables

CI	Description
openshift.DeploymentConfigSpec	OpenShift DeploymentConfig Template (deployable)
openshift.ImageStreamSpec	Specification for an OpenShift project.
openshift.ProjectSpec	Specification for an OpenShift project.
openshift.ResourcesFile	OpenShift Generic Resource Template (deployable)
openshift.RouteSpec	Specification for an OpenShift project.
openshift.TemplateResourcesFile	OpenShift Generic Resource Template (deployable)

Deployeds

CI	Description
openshift.DeploymentConfig	OpenShift DeploymentConfig Template
openshift.ImageStream	OpenShift Image Stream.
openshift.Project	OpenShift Project.
openshift.Resources	OpenShift Generic Resource Template
openshift.Route	OpenShift Route.
openshift.TemplateResources	OpenShift Generic Resource Template

Containers

CI	Description
openshift.Project	OpenShift Project.
openshift.ProjectSpec	Specification for an OpenShift project.
openshift.Server	OpenShift server

Other Configuration Items

CI	Description
openshift.CustomDeploymentStrategyParams	CustomParams are the input to the Custom deployment strategy, and may also be specified for the Recreate and Rolling strategies to customize the execution process that runs the deployment.
openshift.CustomDeploymentStrategyParamsSpec	CustomParams are the input to the Custom deployment strategy, and may also be specified for the Recreate and Rolling strategies to customize the execution process that runs the deployment.
openshift.DeploymentStrategy	Strategy describes how a deployment is executed.
openshift.DeploymentStrategySpec	Strategy describes how a deployment is executed.
openshift.DeploymentTriggerPolicy	Triggers determine how updates to a DeploymentConfig result in new deployments.
openshift.DeploymentTriggerPolicySpec	Triggers determine how updates to a DeploymentConfig result in new deployments.
openshift.RecreateDeploymentStrategyParams	RecreateParams are the input to the Recreate deployment strategy.
openshift.RecreateDeploymentStrategyParamsSpec	RecreateParams are the input to the Recreate deployment strategy.
openshift.RollingDeploymentStrategyParams	Rolling Deployment Params are the input to the Rolling deployment strategy.
openshift.RollingDeploymentStrategyParamsSpec	RollingParams are the input to the Rolling deployment strategy.

Configuration Item Details

openshift.CustomDeploymentStrategyParams

Type Hierarchy	openshift.DeploymentStrategy >> udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

CustomParams are the input to the Custom deployment strategy, and may also be specified for the Recreate and Rolling strategies to customize the execution process that runs the deployment.

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		command: LIST_OF_STRING
		Command is optional and overrides CMD in the container Image.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		environment: LIST_OF_CI<k8s.ContainerEnvVar>
		Environment holds the environment which will be given to the container for Image.
		image: STRING
		Image specifies a Docker image which can carry out a deployment.
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.

openshift.CustomDeploymentStrategyParamsSpec

Type Hierarchy	openshift.DeploymentStrategySpec >> udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

CustomParams are the input to the Custom deployment strategy, and may also be specified for the Recreate and Rolling strategies to customize the execution process that runs the deployment.

		Children
		environment: LIST_OF_CI<k8s.ContainerEnvVar>
		Environment holds the environment which will be given to the container for Image.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		command: LIST_OF_STRING
		Command is optional and overrides CMD in the container Image. (list_of_string)
		image: STRING
		Image specifies a Docker image which can carry out a deployment. (string)
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)

openshift.DeploymentConfig

Type Hierarchy	k8s.OrderedBaseDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

OpenShift DeploymentConfig Template

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		deploymentConfigName: STRING
		Name of the DeploymentConfig. It must match [a-z0-9]+(?:[._-][a-z0-9]+)*
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		min_ready_seconds: INTEGER
		The minimum number of seconds for which a newly created pod should be ready without any of its container crashing.
		paused: BOOLEAN
		Indicates that the deployment config is paused resulting in no new deployments on template changes or changes in the template caused by other triggers.
		readinessProbeRetry: INTEGER = 36
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds
		replicas: INTEGER
		The number of desired replicas.
		revision_history_limit: INTEGER
		The number of old ReplicationControllers to retain to allow for rollbacks.
		selector: MAP_STRING_STRING
		Selector is a label query over pods that should match the Replicas count.
		strategy: SET_OF_CI<openshift.DeploymentStrategySpec>
		Strategy describes how a deployment is executed.
		template: SET_OF_CI<k8s.PodSpec>
		Template is the object that describes the pod that will be created if insufficient replicas are detected.
		test: BOOLEAN
		Test ensures that this deployment config will have zero replicas except while a deployment is running.
		triggers: LIST_OF_CI<openshift.DeploymentTriggerPolicySpec>
		Triggers determine how updates to a DeploymentConfig result in new deployments.
		validatePodsCreation: BOOLEAN = true
		Check that pods are ready and running after deployment.

		Hidden properties
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.DeploymentConfigSpec

Type Hierarchy	udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

OpenShift DeploymentConfig Template (deployable)

		Children
		strategy: SET_OF_CI<openshift.DeploymentStrategySpec>
		Strategy describes how a deployment is executed.
		template: SET_OF_CI<k8s.PodSpec>
		Template is the object that describes the pod that will be created if insufficient replicas are detected.
		triggers: LIST_OF_CI<openshift.DeploymentTriggerPolicySpec>
		Triggers determine how updates to a DeploymentConfig result in new deployments.

		Public properties
		createOrder: STRING
		The order of the step in the step list for the create operation. (integer) default(60)
		deploymentConfigName: STRING
		Name of the DeploymentConfig. It must match [a-z0-9]+(?:[._-][a-z0-9]+)* (string)
		destroyOrder: STRING
		The order of the step in the step list for the destroy operation. (integer) default(40)
		min_ready_seconds: STRING
		The minimum number of seconds for which a newly created pod should be ready without any of its container crashing. (integer)
		modifyOrder: STRING
		The order of the step in the step list for the modify operation. (integer) default(50)
		paused: STRING
		Indicates that the deployment config is paused resulting in no new deployments on template changes or changes in the template caused by other triggers. (boolean) default(false)
		readinessProbeRetry: STRING
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds (integer) default(36)
		replicas: STRING
		The number of desired replicas. (integer)
		revision_history_limit: STRING
		The number of old ReplicationControllers to retain to allow for rollbacks. (integer)
		selector: MAP_STRING_STRING
		Selector is a label query over pods that should match the Replicas count. (map_string_string)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		test: STRING
		Test ensures that this deployment config will have zero replicas except while a deployment is running. (boolean) default(false)
		validatePodsCreation: STRING
		Check that pods are ready and running after deployment. (boolean) default(true)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

openshift.DeploymentStrategy

Virtual Type
Type Hierarchy	udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Strategy describes how a deployment is executed.

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.

openshift.DeploymentStrategySpec

Virtual Type
Type Hierarchy	udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

Strategy describes how a deployment is executed.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)

openshift.DeploymentTriggerPolicy

Type Hierarchy	udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Triggers determine how updates to a DeploymentConfig result in new deployments.

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		automatic: BOOLEAN
		Automatic means that the detection of a new tag value should result in an image update inside the pod template.
		container_names: LIST_OF_STRING
		ContainerNames is used to restrict tag updates to the specified set of container names in a pod.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		from_object: MAP_STRING_STRING
		From is a reference to an image stream tag to watch for changes. From.Name is the only required subfield - if From.Namespace is blank, the namespace of the current deployment trigger will be used.
		last_triggered_image: STRING
		LastTriggeredImage is the last image to be triggered.
		type_of_trigger: STRING
		Type of the trigger

openshift.DeploymentTriggerPolicySpec

Type Hierarchy	udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

Triggers determine how updates to a DeploymentConfig result in new deployments.

		Public properties
		automatic: STRING
		Automatic means that the detection of a new tag value should result in an image update inside the pod template. (boolean) default(false)
		container_names: LIST_OF_STRING
		ContainerNames is used to restrict tag updates to the specified set of container names in a pod. (list_of_string)
		from_object: MAP_STRING_STRING
		From is a reference to an image stream tag to watch for changes. From.Name is the only required subfield - if From.Namespace is blank, the namespace of the current deployment trigger will be used. (map_string_string)
		last_triggered_image: STRING
		LastTriggeredImage is the last image to be triggered. (string)
		type_of_trigger: STRING
		Type of the trigger (string)

openshift.ImageStream

Type Hierarchy	k8s.OrderedBaseDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

OpenShift Image Stream.

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		imageNameAndTag: STRING
		Image and tag name in format :. e.g. alpine:latest
		imageSourceUrl: STRING
		The hostname and port name where repository server is located. e.g. hub.docker.com/r/openshift.
		imageStreamName: STRING
		Name of the Image Stream. It must match [a-z0-9]+(?:[._-][a-z0-9]+)*
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		verifyCertificates: BOOLEAN
		Validate certificates?

		Hidden properties
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.ImageStreamSpec

Type Hierarchy	udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification for an OpenShift project.

		Public properties
		createOrder: STRING = 60
		The order of the step in the step list for the create operation. (integer) default(60)
		destroyOrder: STRING = 40
		The order of the step in the step list for the destroy operation. (integer) default(40)
		imageNameAndTag: STRING
		Image and tag name in format :. e.g. alpine:latest (string)
		imageSourceUrl: STRING
		The hostname and port name where repository server is located. e.g. hub.docker.com/r/openshift. (string)
		imageStreamName: STRING
		Name of the Image Stream. It must match [a-z0-9]+(?:[._-][a-z0-9]+)* (string)
		modifyOrder: STRING = 50
		The order of the step in the step list for the modify operation. (integer) default(50)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		verifyCertificates: STRING = false
		Validate certificates? (boolean) default(false)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

openshift.Project

Type Hierarchy	k8s.BasePodContainer >> udm.BaseDeployedContainer >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Container, udm.Deployed, udm.EmbeddedDeployedContainer, udm.Taggable

OpenShift Project.

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		projectName: STRING
		Project Name
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		description: STRING
		Description
		projectDisplayName: STRING
		Project Display Name
		tags: SET_OF_STRING
		If set, only deployables with the same tag will be automatically mapped to this container.

		Hidden properties
		containerHelper: STRING = xld.openshift.project.helper.ProjectHelper
		Container Helper
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.ProjectSpec

Type Hierarchy	udm.BaseDeployableContainer >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Container, udm.Deployable, udm.DeployableContainer, udm.Taggable

Specification for an OpenShift project.

		Public properties
		containerTags: SET_OF_STRING
		The tags to copy to the Deployed Container
		createOrder: STRING = 60
		The order of the step in the step list for the create operation. (integer) default(60)
		description: STRING
		Description (string)
		destroyOrder: STRING = 40
		The order of the step in the step list for the destroy operation. (integer) default(40)
		modifyOrder: STRING = 50
		The order of the step in the step list for the modify operation. (integer) default(50)
		projectDisplayName: STRING
		Project Display Name (string)
		projectName: STRING
		Project Name (string)
		tags: SET_OF_STRING
		If set, only deployables with the same tag will be automatically mapped to this container. (set_of_string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

openshift.RecreateDeploymentStrategyParams

Type Hierarchy	openshift.DeploymentStrategy >> udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

RecreateParams are the input to the Recreate deployment strategy.

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		mid: MAP_STRING_STRING
		Mid is a lifecycle hook which is executed while the deployment is scaled down to zero before the first new pod is created.
		post: MAP_STRING_STRING
		Post is a lifecycle hook which is executed after the strategy has finished all deployment logic.
		pre: MAP_STRING_STRING
		Pre is a lifecycle hook which is executed before the strategy manipulates the deployment.
		timeout_seconds: INTEGER
		TimeoutSeconds is the time to wait for updates before giving up. If the value is nil, a default will be used.

openshift.RecreateDeploymentStrategyParamsSpec

Type Hierarchy	openshift.DeploymentStrategySpec >> udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

RecreateParams are the input to the Recreate deployment strategy.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		mid: MAP_STRING_STRING
		Mid is a lifecycle hook which is executed while the deployment is scaled down to zero before the first new pod is created. (map_string_string)
		post: MAP_STRING_STRING
		Post is a lifecycle hook which is executed after the strategy has finished all deployment logic. (map_string_string)
		pre: MAP_STRING_STRING
		Pre is a lifecycle hook which is executed before the strategy manipulates the deployment. (map_string_string)
		timeout_seconds: STRING
		TimeoutSeconds is the time to wait for updates before giving up. If the value is nil, a default will be used. (integer)

openshift.Resources

Type Hierarchy	k8s.AbstractResources >> udm.BaseDeployedArtifact >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployed, udm.DerivedArtifact, udm.EmbeddedDeployedContainer

OpenShift Generic Resource Template

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		mergePatchType: ENUM [json, merge, strategic] = strategic
		Merge patch type, see https://kubernetes.io/docs/tasks/run-application/update-api-object-kubectl-patch/#alternate-forms-of-the-kubectl-patch-command
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		propagationPolicy: ENUM [Foreground, Background, Orphan] = Foreground
		Propagation policy at the moment of deletion, see https://kubernetes.io/docs/concepts/workloads/controllers/garbage-collection/
		bytesToReadFromContainerLogs: INTEGER = 4000
		Number of bytes to read from the container logs.
		captureOutputProperties: BOOLEAN
		Capture output properties for resources like Ingress
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		displayResourceOnLogs: BOOLEAN
		Log the resource specification while waiting for it to be ready.
		outputVariables: MAP_STRING_STRING
		Output variables captured in deployed.
		placeholders: MAP_STRING_STRING
		A Map containing all the placeholders mapped to their values. Special values are <ignore> or <empty>
		readinessProbeRetry: INTEGER = 36
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds
		showContainerLogs: BOOLEAN
		Show the container logs when describing resource. Resource is described at the end of the 'Wait' step.
		updateMethod: ENUM [apply, patch, replace] = patch
		k8s update method; patch updates might not remove certain fields from deployment.
		validatePodsCreation: BOOLEAN = true
		Check that pods are ready and running after deployment.
		waitServiceLoadBalancerIngress: BOOLEAN = true
		Wait Service Load Balancer Ingress

		Hidden properties
		resourceFactory: STRING = xld.openshift.resource.factory.OpenShiftResourceFactory
		Resource Factory
		resourceWaitTime: INTEGER = 50
		Resource Wait Time
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.ResourcesFile

Type Hierarchy	k8s.AbstractResourcesFile >> udm.BaseDeployableArtifact >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployable, udm.DeployableArtifact, udm.SourceArtifact, udm.Taggable

OpenShift Generic Resource Template (deployable)

		Public properties
		bytesToReadFromContainerLogs: STRING
		Number of bytes to read from the container logs. (integer) default(4000)
		captureOutputProperties: STRING
		Capture output properties for resources like Ingress (boolean) default(false)
		createOrder: STRING
		The order of the step in the step list for the create operation. (integer) default(60)
		delimiters: STRING = {{ }}
		The delimiters used indicate placeholders, defaults to '{{ }}'. This is a 5 character string with a space in the middle, the first two are the leading delimiter, the last two are the closing delimiter
		destroyOrder: STRING
		The order of the step in the step list for the destroy operation. (integer) default(40)
		displayResourceOnLogs: STRING
		Log the resource specification while waiting for it to be ready. (boolean) default(false)
		mergePatchType: STRING
		Merge patch type, see https://kubernetes.io/docs/tasks/run-application/update-api-object-kubectl-patch/#alternate-forms-of-the-kubectl-patch-command (enum) values(json, merge, strategic) default(strategic)
		modifyOrder: STRING
		The order of the step in the step list for the modify operation. (integer) default(50)
		propagationPolicy: STRING
		Propagation policy at the moment of deletion, see https://kubernetes.io/docs/concepts/workloads/controllers/garbage-collection/ (enum) values(Foreground, Background, Orphan) default(Foreground)
		showContainerLogs: STRING
		Show the container logs when describing resource. Resource is described at the end of the 'Wait' step. (boolean) default(false)
		updateMethod: STRING
		k8s update method; patch updates might not remove certain fields from deployment. (enum) values(apply, patch, replace) default(patch)
		checksum: STRING
		The checksum used to detect differences on the artifact. If not provided, it will be calculated by XL Deploy.
		credentials: CI<credentials.Credentials>
		Credentials of the URI.
		excludeFileNamesRegex: STRING
		Regular expression that matches file names that must be excluded from scanning
		fileEncodings: MAP_STRING_STRING = { .+\.properties=ISO-8859-1 }
		A map that maps regular expressions matching the full path of file(s) in the artifact to character set encodings
		fileUri: STRING
		The URI pointing to the (remote) location of the file this artifact represents
		isRescanned: BOOLEAN
		Indicates if the artifact has been rescanned
		outputVariables: MAP_STRING_STRING
		Output variables captured in deployed. (map_string_string)
		placeholders: SET_OF_STRING
		Placeholders detected in this artifact
		preScannedPlaceholders: BOOLEAN
		Whether this artifact has been pre-scanned by the packager (ie. scanned for placeholders and checksum is set)
		proxySettings: CI<credentials.ProxySettings>
		Proxy Settings for artifact location
		readinessProbeRetry: STRING
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds (integer) default(36)
		scanPlaceholders: BOOLEAN = true
		Whether to scan this artifact to replace placeholders when it is imported
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		validatePodsCreation: STRING
		Check that pods are ready and running after deployment. (boolean) default(true)
		waitServiceLoadBalancerIngress: STRING
		Wait Service Load Balancer Ingress (boolean) default(true)

		Hidden properties
		textFileNamesRegex: STRING = .+\.( json \| yml \| yaml )
		Regular expression that matches file names of text files
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

Control task	Parameter CI	Attributes	Description
rescanArtifacts		delegate = rescanArtifact	No description.

openshift.RollingDeploymentStrategyParams

Type Hierarchy	openshift.DeploymentStrategy >> udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Rolling Deployment Params are the input to the Rolling deployment strategy.

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		interval_seconds: INTEGER
		IntervalSeconds is the time to wait between polling deployment status after update.
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods.
		max_surge: INTEGER
		MaxSurge is the maximum number of pods that can be scheduled above the original number of pods. Value can be an absolute number (ex: 5) or a percentage of total pods at the start of the update (ex: 10%).
		max_unavailable: INTEGER
		MaxUnavailable is the maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total pods at the start of update (ex: 10%).
		post: MAP_STRING_STRING
		Post is a lifecycle hook which is executed after the strategy has finished all deployment logic.
		pre: MAP_STRING_STRING
		Pre is a lifecycle hook which is executed before the strategy manipulates the deployment.
		timeout_seconds: INTEGER
		TimeoutSeconds is the time to wait for updates before giving up. If the value is nil, a default will be used.
		update_period_seconds: INTEGER
		UpdatePeriodSeconds is the time to wait between individual pod updates. If the value is nil, a default will be used.

openshift.RollingDeploymentStrategyParamsSpec

Type Hierarchy	openshift.DeploymentStrategySpec >> udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

RollingParams are the input to the Rolling deployment strategy.

		Public properties
		annotations: MAP_STRING_STRING
		Annotations is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		interval_seconds: STRING
		IntervalSeconds is the time to wait between polling deployment status after update. (integer)
		labels: MAP_STRING_STRING
		Labels is a set of key, value pairs added to custom deployer and lifecycle pre/post hook pods. (map_string_string)
		max_surge: STRING
		MaxSurge is the maximum number of pods that can be scheduled above the original number of pods. Value can be an absolute number (ex: 5) or a percentage of total pods at the start of the update (ex: 10%). (integer)
		max_unavailable: STRING
		MaxUnavailable is the maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total pods at the start of update (ex: 10%). (integer)
		post: MAP_STRING_STRING
		Post is a lifecycle hook which is executed after the strategy has finished all deployment logic. (map_string_string)
		pre: MAP_STRING_STRING
		Pre is a lifecycle hook which is executed before the strategy manipulates the deployment. (map_string_string)
		timeout_seconds: STRING
		TimeoutSeconds is the time to wait for updates before giving up. If the value is nil, a default will be used. (integer)
		update_period_seconds: STRING
		UpdatePeriodSeconds is the time to wait between individual pod updates. If the value is nil, a default will be used. (integer)

openshift.Route

Type Hierarchy	k8s.OrderedBaseDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

OpenShift Route.

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		serviceName: STRING
		Primary service name for traffic routing.
		serviceWeight: INTEGER = 256
		Primary service weight determines the relative traffic to be routed to this service.
		terminationType: ENUM [None, Edge, Passthrough, ReEncrypt] = None
		Termination type specifies how the TLS termination occurs.
		alternateServices: MAP_STRING_STRING
		List of alternate services for splitting the traffic. The key-value represents the service name and service weight.
		caCertificate: STRING
		Certification authority certificate (ca.crt) to validate router certificate.
		certificate: STRING
		TLS certificate for router (apiserver.crt).
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		destinationCACertificate: STRING
		Certification authority certificate (ca.crt) to validate the endpoint certificate, securing the connection from the router to the destination.
		hostName: STRING
		Public hostname for the route. If not specified, a hostname is generated.
		insecureEdgeTerminationPolicy: STRING
		It specifies the desired behavior for insecure connections to a route.
		key: STRING
		TLS private key for router (apiserver.key).
		path: STRING
		Path that the router watches to route traffic to the service.
		routeName: STRING
		Name of the route.
		targetPort: STRING
		The target port on pods selected by the service this route points to.
		wildcardPolicy: STRING
		Wildcard policy for traffic routing. A wildcard policy allows a user to define a route that covers all hosts within a domain.

		Hidden properties
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.RouteSpec

Type Hierarchy	udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification for an OpenShift project.

		Public properties
		alternateServices: MAP_STRING_STRING
		List of alternate services for splitting the traffic. The key-value represents the service name and service weight. (map_string_string)
		caCertificate: STRING
		Certification authority certificate (ca.crt) to validate router certificate. (string)
		certificate: STRING
		TLS certificate for router (apiserver.crt). (string)
		createOrder: STRING = 60
		The order of the step in the step list for the create operation. (integer) default(60)
		destinationCACertificate: STRING
		Certification authority certificate (ca.crt) to validate the endpoint certificate, securing the connection from the router to the destination. (string)
		destroyOrder: STRING = 40
		The order of the step in the step list for the destroy operation. (integer) default(40)
		hostName: STRING
		Public hostname for the route. If not specified, a hostname is generated. (string)
		insecureEdgeTerminationPolicy: STRING
		It specifies the desired behavior for insecure connections to a route. (string)
		key: STRING
		TLS private key for router (apiserver.key). (string)
		modifyOrder: STRING = 50
		The order of the step in the step list for the modify operation. (integer) default(50)
		path: STRING
		Path that the router watches to route traffic to the service. (string)
		routeName: STRING
		Name of the route. (string)
		serviceName: STRING
		Primary service name for traffic routing. (string)
		serviceWeight: STRING = 256
		Primary service weight determines the relative traffic to be routed to this service. (integer) default(256)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		targetPort: STRING
		The target port on pods selected by the service this route points to. (string)
		terminationType: STRING = None
		Termination type specifies how the TLS termination occurs. (enum) values(None, Edge, Passthrough, ReEncrypt) default(None)
		wildcardPolicy: STRING
		Wildcard policy for traffic routing. A wildcard policy allows a user to define a route that covers all hosts within a domain. (string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

openshift.Server

Type Hierarchy	k8s.Cluster >> udm.BaseContainer >> udm.BaseConfigurationItem
Interfaces	udm.Container, udm.Taggable

OpenShift server

		Public properties
		serverUrl: STRING
		Url of the OpenShift server
		caCert: STRING
		Certification authority certificate(ca.crt) for server
		debug: BOOLEAN
		Dump request/response for troubleshooting purposes.
		openshiftToken: STRING
		Openshift Token
		proxyServer: CI<credentials.ProxyServer>
		Proxy Server
		tags: SET_OF_STRING
		If set, only deployables with the same tag will be automatically mapped to this container.
		tlsCert: STRING
		TLS certificate for master server(apiserver.crt)
		tlsPrivateKey: STRING
		TLS private key for master server(apiserver.key)
		verifyCertificates: BOOLEAN = true
		Validate certificates?

		Hidden properties
		clientFactory: STRING = xld.openshift.factories.client_factory.OpenShiftClientFactory
		Client Factory
		containerHelper: STRING = xld.openshift.server_helper.ServerHelper
		Container Helper

Control task	Parameter CI	Attributes	Description
checkConnection		delegate = jythonScript, script = xld/openshift/check_connection.py	Verify the connection to the Openshift Cloud.

openshift.TemplateResources

Type Hierarchy	openshift.Resources >> k8s.AbstractResources >> udm.BaseDeployedArtifact >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployed, udm.DerivedArtifact, udm.EmbeddedDeployedContainer

OpenShift Generic Resource Template

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		createOrder: INTEGER = 60
		The order of the step in the step list for the create operation.
		destroyOrder: INTEGER = 40
		The order of the step in the step list for the destroy operation.
		mergePatchType: ENUM [json, merge, strategic] = strategic
		Merge patch type, see https://kubernetes.io/docs/tasks/run-application/update-api-object-kubectl-patch/#alternate-forms-of-the-kubectl-patch-command
		modifyOrder: INTEGER = 50
		The order of the step in the step list for the modify operation.
		propagationPolicy: ENUM [Foreground, Background, Orphan] = Foreground
		Propagation policy at the moment of deletion, see https://kubernetes.io/docs/concepts/workloads/controllers/garbage-collection/
		bytesToReadFromContainerLogs: INTEGER = 4000
		Number of bytes to read from the container logs.
		captureOutputProperties: BOOLEAN
		Capture output properties for resources like Ingress
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		displayResourceOnLogs: BOOLEAN
		Log the resource specification while waiting for it to be ready.
		json: STRING
		Json
		outputVariables: MAP_STRING_STRING
		Output variables captured in deployed.
		parameters: MAP_STRING_STRING
		Parameters to add/override in the template. The key-value represents the service name and service weight.
		placeholders: MAP_STRING_STRING
		A Map containing all the placeholders mapped to their values. Special values are <ignore> or <empty>
		readinessProbeRetry: INTEGER = 36
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds
		showContainerLogs: BOOLEAN
		Show the container logs when describing resource. Resource is described at the end of the 'Wait' step.
		templateCreationStrategy: ENUM [Process the template, Save template] = Process the template
		Select the process template for Create the objects defined in the template or Select Save the template for Save the template to the project. This will make the template available to anyone who can view the project in openshift cluster
		updateMethod: ENUM [apply, patch, replace] = patch
		k8s update method; patch updates might not remove certain fields from deployment.
		validatePodsCreation: BOOLEAN = true
		Check that pods are ready and running after deployment.
		waitServiceLoadBalancerIngress: BOOLEAN = true
		Wait Service Load Balancer Ingress

		Hidden properties
		resourceFactory: STRING = xld.openshift.resource.factory.OpenShiftResourceFactory
		Resource Factory
		resourceWaitTime: INTEGER = 50
		Resource Wait Time
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.

openshift.TemplateResourcesFile

Type Hierarchy	openshift.ResourcesFile >> k8s.AbstractResourcesFile >> udm.BaseDeployableArtifact >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployable, udm.DeployableArtifact, udm.SourceArtifact, udm.Taggable

OpenShift Generic Resource Template (deployable)

		Public properties
		bytesToReadFromContainerLogs: STRING
		Number of bytes to read from the container logs. (integer) default(4000)
		captureOutputProperties: STRING
		Capture output properties for resources like Ingress (boolean) default(false)
		createOrder: STRING
		The order of the step in the step list for the create operation. (integer) default(60)
		delimiters: STRING = {{ }}
		The delimiters used indicate placeholders, defaults to '{{ }}'. This is a 5 character string with a space in the middle, the first two are the leading delimiter, the last two are the closing delimiter
		destroyOrder: STRING
		The order of the step in the step list for the destroy operation. (integer) default(40)
		displayResourceOnLogs: STRING
		Log the resource specification while waiting for it to be ready. (boolean) default(false)
		mergePatchType: STRING
		Merge patch type, see https://kubernetes.io/docs/tasks/run-application/update-api-object-kubectl-patch/#alternate-forms-of-the-kubectl-patch-command (enum) values(json, merge, strategic) default(strategic)
		modifyOrder: STRING
		The order of the step in the step list for the modify operation. (integer) default(50)
		propagationPolicy: STRING
		Propagation policy at the moment of deletion, see https://kubernetes.io/docs/concepts/workloads/controllers/garbage-collection/ (enum) values(Foreground, Background, Orphan) default(Foreground)
		showContainerLogs: STRING
		Show the container logs when describing resource. Resource is described at the end of the 'Wait' step. (boolean) default(false)
		updateMethod: STRING
		k8s update method; patch updates might not remove certain fields from deployment. (enum) values(apply, patch, replace) default(patch)
		checksum: STRING
		The checksum used to detect differences on the artifact. If not provided, it will be calculated by XL Deploy.
		credentials: CI<credentials.Credentials>
		Credentials of the URI.
		excludeFileNamesRegex: STRING
		Regular expression that matches file names that must be excluded from scanning
		fileEncodings: MAP_STRING_STRING = { .+\.properties=ISO-8859-1 }
		A map that maps regular expressions matching the full path of file(s) in the artifact to character set encodings
		fileUri: STRING
		The URI pointing to the (remote) location of the file this artifact represents
		isRescanned: BOOLEAN
		Indicates if the artifact has been rescanned
		outputVariables: MAP_STRING_STRING
		Output variables captured in deployed. (map_string_string)
		parameters: MAP_STRING_STRING
		Parameters to add/override in the template. The key-value represents the service name and service weight. (map_string_string)
		placeholders: SET_OF_STRING
		Placeholders detected in this artifact
		preScannedPlaceholders: BOOLEAN
		Whether this artifact has been pre-scanned by the packager (ie. scanned for placeholders and checksum is set)
		proxySettings: CI<credentials.ProxySettings>
		Proxy Settings for artifact location
		readinessProbeRetry: STRING
		Number of retries until readiness probe check passes. The interval between each try is 5 seconds (integer) default(36)
		scanPlaceholders: BOOLEAN = true
		Whether to scan this artifact to replace placeholders when it is imported
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		templateCreationStrategy: STRING
		Select the process template for Create the objects defined in the template or Select Save the template for Save the template to the project. This will make the template available to anyone who can view the project in openshift cluster (enum) values(Process the template, Save template) default(Process the template)
		validatePodsCreation: STRING
		Check that pods are ready and running after deployment. (boolean) default(true)
		waitServiceLoadBalancerIngress: STRING
		Wait Service Load Balancer Ingress (boolean) default(true)

		Hidden properties
		textFileNamesRegex: STRING = .+\.( json \| yml \| yaml )
		Regular expression that matches file names of text files
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.
		json: STRING
		Json (string)

Control task	Parameter CI	Attributes	Description
rescanArtifacts		delegate = rescanArtifact	No description.